The "Texas" Welder Bed for the CEN Racing F450

The "Texas" Welder Bed is our premium scale welding bed for CEN Racing F450.  It is modeled after the "CM" brand welding beds and styled after welding rigs commonly found in Texas. Featuring spots for full size gas tanks, and a gas welder, it also has a diamond plate pattern between the two simulated compartment lids on the back left and right of the bed.  The colored lenses are ready for 3mm LED for that final touch.

FREE Exhaust Tip and Bracket included.

Details:

Fully bolt on and partially assembled.  This install should take you less than 15 minutes to install.

Features hidden cab mounts and is mounted directly to your frame.  You will need to relocate your battery to the "transverse" mounting style.  All CEN 450 allow you to relocate the battery in this manner.

Lenses are translucent and ready for 3mm LED lights.

Receiver hitch included is a standard 6mm x 6mm.  Not compatible with aftermarket hitches for the F450 (CEN uses a NON standard size). Most of the industry utilizes the 6x6 size standard.

All hardware needed for assembly and install is included.

Made from PETG.

Tools required for assembly: M2 driver.

Optional: Lexan reamer to enlarge two holes behind the cab for the bed body posts.

Optional parts(not included): 3mm LED lights.

Does not come with truck or wheels, This is for the welding bed only.

Note for our original lift kit owners: minor trimming of the lift plates will be needed. Trim through the center of the 2nd to last hole to allow the bed to be mounted.  A dremel or small saw work best for this.

This is mostly a non permanent change should you decide to use the Lexan rear bed again at some point in the future.

This is not compatible with our CrawlersnCustoms Lowering kit.  This is compatible with both the American Force (Gen1) and KG1 (Gen2) CEN Racing F450.  May or may not be compatible with lift kits.

Thank you for reading and enjoy the build!